OP-PS12-O2
OP-PS12-O2
Nut Size：3 ~ 12 mm
Free Speed：2,700 rpm
Pull Force：2075 kg / 4565 lbs
Stroke：6 mm
● Hydraulic structure provides stable power and long durability.
● Pulling force up to 2075 kg (4565 lbs) for heavy-duty applications.
● Compatible nut sizes: M3–M12.
● Suitable for aluminum, iron, and stainless-steel nuts.
● Adjustable stroke up to 6 mm.
● Equipped with a hanging ring for use with spring balancers to reduce fatigue and prevent tool damage.
Applications
Widely used in automotive and motorcycle industries, metal fabrication, hardware manufacturing, and a wide range of assembly and maintenance operations.
SPECIFICATION(air pressure at 90 psi、6.2bar、6.3kg/cm2)
| MODEL | Structure | | | Free | Stroke | Pull Force | Overall Length | Air Inlet | Net Weight | |||
| Speed | ||||||||||||
| mm | mm | rpm | mm | kg | lbs | mm | inch | P.T | kg | lb | ||
| OP-PS12-O2 | Hydraulic | 3 , 4 , 5 , 6 8 , 10 , 12 | 3 , 4 , 5 , 6 8 , 10 , 12 | 2700 | 6 | 2075 | 4565 | 280 | 11.02 | 1/4 | 2.38 | 5.24 |
Packing List :
Carton : 2 set / N.W. : 5 kg / G.W : 9.6 kg / Cuft : 2'
🔹Applications
Suitable for installation of M3–M12 rivet nuts (excluding stainless steel M12).
Delivers stable and reliable pulling performance at 90 PSI (7 BAR).
🔹Air Supply & Setup Guidelines
For optimal performance, use with an FRL unit (Filter, Regulator, Lubricator) to ensure clean, regulated, and lubricated air supply.
Continuous operation above 90 PSI (7 BAR) or excessive stroke settings may reduce tool lifespan.
🔹Routine Maintenance
- Add 2–3 drops of low-viscosity air tool oil into the air inlet every few days
- Run the tool idle for at least 3 seconds to ensure proper lubrication
- Check hydraulic oil level monthly and refill if necessary
Insufficient lubrication or low oil levels may result in reduced pulling force and unstable performance.
🔹Quality Control Guidelines
For consistent production quality, it is recommended to use a pull force tester to verify tool performance before daily operation.
This helps prevent assembly defects and ensures stable fastening results.
🔹Stroke Adjustment Guidelines
Proper stroke adjustment is critical for correct operation:
- Insufficient stroke may result in incomplete fastening
- Excessive stroke may damage threads or mandrel components
Improper use or long-term overstroke operation may cause tool damage and is not covered under warranty.
🔹Product Features
Industrial-grade design for high efficiency and durability.
Engineered for continuous operation in demanding production environments.
🔹Warranty
This product is covered by a one-year warranty (excluding consumables and misuse).
Repair services are available for non-warranty cases, with full spare parts support provided.